RC MAKER Xray X4 GeoCarbon Front Rammer Plate - X4-CBP

RC MAker Product Description:
Our brand new GeoCarbon bumper with stopper for XRAY X4'24 impresses with its elegant, unobtrusive and innovative design. The plastic X4 bumper and stopper, while effective, is in our eyes not the most elegant solution to keep your chassis safe in the event of an accident.
Our design integrates the stopper under the main bumper, which connects to a lower flat section on the front bulkheads. In the event of an impact, the force is transferred through this lower part of the bulkheads, keeping the chassis in tact, with minimal impact on the bulkheads. The 4mm thick, heavy-duty brace slides over the small bumper posts, making it low enough to connect to the bulkhead. When the top plate is tightened, it clamps the entire assembly tightly in place.
When at rest, a gap of 0.1-0.2 mm remains between the bulkheads and this support to prevent rubbing and pinching. This support only becomes active in the event of a crash! This is the optimal solution to keep the chassis of your brand new X4'24 safe and looking good at the same time!
Our new Bumper Plate features three holes that allow you to adjust the body forward and backwards like the stock plates do. The integrated stopper does not move, it stays in the same place regardless of the position of the body post! Unlike other stoppers, our stopper can also stay in place when the front sway bar is removed and does not need to move when the front flex brace is used or not!
This offers you a more elegant, durable and comfortable solution than the standard parts.
Installation:
Slide the small bumper stop over the plastic posts with the notch facing down. It is a hard press fit and should snap into place and sit flush with the plastic posts.
Install the upper bumper bracket and screw it into the holes using the desired screws.
characteristics
Elegant GeoCarbon CNC machined design made from 3mm carbon
Integrated 5mm thick bumper mount to protect your chassis
Adjustable position of the body mount as included in the kit
Does not need to be removed to remove the stabilizer
Direct replacement for the standard tops and stoppers, no modifications necessary
100% made in Australia